K-2SO Vocalizer Classic - Installation Guide

Power In:

5V USB-C power. A cell phone charger or battery bank works great

On/Off Switch:

Any Single Pole Single Throw (SPST) latching switch will work

Status Light:

Green = On

Audio:

4 Ohm 3W Speaker out

Sensor:

The sensor is shaped like an LED. It should be visible on the droid but discretely hidden. The remote control needs line of sight to it. The sensor is 5mm. A good location can be in the base, or a hole through a restraining bolt

Remote:

Each number button is mapped to a sound. The up and down arrows control the volume. Left and right will page through the available sounds. The B1 has 100 sounds - each “page” has 10 sounds mapped to the numbers on the remote